The Loop-a-Lator is a single rack space all tube impedance matching device that allows you to use your passive loop equipped amplifier to its fullest potential, by placing your time-based effects after the overdrive.

The Loop-a-Lator input takes the large signal from the preamp out on the amp, and converts it to a lower impedance signal that won’t overload your guitar effects input at the Send. The output of the effects are then fed to the Return of the Loop-a-lator, which amplifies that signal back up to what the power amp in wants to see at the Output.

The Loop-a-lator can be run at unity gain, with both knobs around 11:00 and use the amps Master Volume to control the level, or you can actually turn the amp up to the “sweet spot” (YSMV), reduce the Drive control to about 9:30 and use the Loop-a-Lator Output control as your loudness control.

The Loop-a-Lator imparts a smoothing effect to the high end frequencies of your amp, with or without effects, and has been said to provide a perceived 3-D effect, however, there is no specific circuitry meant to provide this, what it does do, is run your signal through 2 more tube stages, and all the glorious 2nd and 4th order harmonic content they provide.

Features and controls:

• Drive Level
• Drive Bright Switch
• Output Level
• Output Bright Switch
• In, Send, Return, Out Jacks

Tube Compliment

• 1x ECC83/12AX7/7025 Hi Mu Twin Triode

If you are the ORIGINAL OWNER (meaning you purchased it from Bludotone directly), or are about to become the original owner of a Bludotone amplifier, you may qualify for a $300 discount on the retail price of a Loop-a-Lator!!!

Just a way of saying thanks for your patience, Email or call for details.